Double Acting Hydraulic Cylinder - List of Manufacturers, Suppliers, Companies and Products

Double Acting Hydraulic Cylinder Product List

1～5 item / All 5 items

Displayed results
HCRL Series Double-acting Hydraulic Cylinder with Safety Lock Nut

HCRL Series Double-acting Hydraulic Cylinder with Safety Lock Nut

The return side is also controlled by hydraulic pressure! Coating specifications that can withstand bad weather. The maximum operating pressure is 70 MPa.

The "HCRL Series" is a double-acting hydraulic cylinder that can maintain a load for an extended period thanks to its mechanical safety lock nut. It supports a maximum operating pressure of 70 MPa and allows for hydraulic control of both pushing and retracting. It can withstand eccentric loads of up to approximately 10% of the cylinder's maximum capacity. Designed for high-frequency use with hard coating treatment, the tilt saddle attached to the cylinder can accommodate inclinations of up to 5 degrees. 【Features】 ■ Maximum operating pressure of 70 MPa ■ Coating specifications for both internal and external surfaces to withstand bad weather ■ Equipped with an over-stroke prevention stop ring ■ Low-friction safety lock nut allows for quick tightening *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

  • Prime movers, torque converters, hydraulic equipment, generators

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: The jack system slides the Holbrook Canal into the designated position.

Case: The jack system slides the Holbrook Canal into the designated position.

Horizontal bridge slide method! I was able to complete the slide in 52 minutes!

Minimizing the time that State Route 266 is closed was a primary objective during the reconstruction of the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, and once the old bridge was taken down, the new bridge needed to be slid into place at the original bridge's location. To slide the new bridge into its designated position, a lateral bridge sliding method was employed. We provided a hydraulic solution that allowed the new 44.5-foot bridge structure to be pushed into place using the lateral sliding method with PTFE slide elements. We supplied two "RR Series double-acting hydraulic cylinders," each equipped with its own unique "ZU Series hydraulic pump" and integrated pendant control. The pendant control enabled the operator to maintain individual control and manage any misalignment of the bridge structure between the abutments or recovery from wedging. *For more details, please refer to the PDF document or feel free to contact us.*

  • Prime movers, torque converters, hydraulic equipment, generators

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double-acting hydraulic cylinder

Double-acting hydraulic cylinder

Highly reliable check valve mechanism! Usable for telescopic bidirectional opening and closing devices.

The "Double-acting Hydraulic Cylinder" is a product equipped with a self-holding function using hydraulic pressure. When the supply of hydraulic oil is stopped, it maintains hydraulic pressure with a highly reliable check valve mechanism, holding the cylinder's stopping position. Its high-strength and durable structure allows it to generate significant thrust under high hydraulic pressure. Additionally, there are examples of its adoption in domestic large, medium, and small trucks. 【Features】 ■ Holds the stopping position of the cylinder ■ High-strength and durable structure ■ Generates significant thrust under high hydraulic pressure ■ Examples of adoption in domestic large, medium, and small trucks *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: The jack system slides the Holbrook Canal into the designated position.

Case: The jack system slides the Holbrook Canal into the designated position.

Maintaining recovery methods from shifts in bridge structures and wedges! A case of providing hydraulic solutions.

Minimizing the time that State Route 266 is closed was a primary objective when reconstructing the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, but once the old bridge was taken down, the new bridge had to be slid into place at the original bridge's location. To achieve this, Enerpac provided a hydraulic solution that could push the new 44.5-foot bridge structure into position using a lateral sliding method with PTFE slide elements. The slide was completed in 52 minutes. **Case Overview** - Customer: Kiewit (United States) - Products: RR Series double-acting hydraulic cylinders, ZU Series hydraulic pumps - Result: The slide was completed in 52 minutes. *For more details, please refer to the PDF document or feel free to contact us.*

  • Prime movers, torque converters, hydraulic equipment, generators

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case: Descending an 80-ton yacht synchronously.

Case: Descending an 80-ton yacht synchronously.

A case where four double-acting aluminum hydraulic cylinders lowered the yacht by 100mm at once!

A luxurious sailing yacht worth millions of dollars was jacked up by 2 meters for renovations. After the modifications, it was necessary to lower the hull to return the yacht to the sea. Although the yacht was made of carbon fiber, it still weighed 80 tons, and the weight was not evenly distributed. The uneven weight distribution posed a serious challenge for safely lowering the yacht. Therefore, the "EVO-W Series Synchronous Lifting System" was used to safely lower the yacht with precise control. The stage lifting operation mode, featuring nine pre-set working modes, allows a single operator to monitor and control the stroke and center of gravity from a touchscreen display. *For more details, please refer to the PDF document or feel free to contact us.

  • Other elevators and transport systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.